MC464 and Anybus module Modbus TCP

• Related Articles

• AN-330 MC464 Anybus Modbus Module

  The document covers the use of the MC464 with P875 carrying the Anybus CC module ABCC-EIT_2P, AB6223-B running V1.02 of the Anybus CC firmware. MC464 firmware V2.0256 or later is required

• Trio - Modbus TCP Client

  The Trio firmware can open a Modbus Client port and communicate with any Modbus Server. Port number is usually 502. You need to have the document from the slave vendor that lists the register numbers in the Modbus connection of the device. Probably ...

• AN-366 MODBUS TCP response time

  When planning a network and the communication links between devices, the available response time is often needed to allow the system designer to work out how much data can be transferred.  This document lists the results of some timing tests on ...

• Modbus TCP and Ethernet IP on Flex-6-Nano

  Q. Can we run and use Modbus TCP server and Ethernet IP server on Flex-6-Nano at the same time? A. Yes you can use both in parallel. They open different "port" numbers on the Ethernet communications but have the same IP Address. For example Modbus is ...

• MC_CONFIG vs Flash parameters

  All Motion Coordinators store the IP_ADDRESS, IP_NETMASK and IP_GATEWAY in Flash memory.  So there is usually no need to add them to the MC_CONFIG. There are some differences with other system parameters. MC4N-ECAT, MC4N-RTX, MC6N-ECAT, Flex-6 Nano ...