AN-330 MC464 Anybus Modbus Module
The document covers the use of the MC464 with P875 carrying the Anybus CC module ABCC-EIT_2P, AB6223-B running V1.02 of the Anybus CC firmware.
MC464 firmware V2.0256 or later is required
Related Articles
MC464 and Anybus module Modbus TCP
The instructions and advice in this document cover the use of the MC464 with P875 carrying the Anybus CC module Drop Files to AttachTrio - Modbus TCP Client
The Trio firmware can open a Modbus Client port and communicate with any Modbus Server. Port number is usually 502. You need to have the document from the slave vendor that lists the register numbers in the Modbus connection of the device. Probably ...Modbus RTU Holding Registers 40001 ...
A program has this line: mb_status = MODBUS(3, -1, mbh, $04, addr, 40001, 1, 1) That is for reading the value from the server device. The syntax is value = MODBUS(3, slot, handle, modbus function code[, parameters]) 4 is Read Input Registers, so the ...AN-366 MODBUS TCP response time
When planning a network and the communication links between devices, the available response time is often needed to allow the system designer to work out how much data can be transferred. This document lists the results of some timing tests on ...Modbus TCP and Ethernet IP on Flex-6-Nano
Q. Can we run and use Modbus TCP server and Ethernet IP server on Flex-6-Nano at the same time? A. Yes you can use both in parallel. They open different "port" numbers on the Ethernet communications but have the same IP Address. For example Modbus is ...