Related Articles
AN-329 PWM output control for Laser fire with ATYPE 36
PWM outputs are required for laser control and similar applications. This document introduces a new ATYPE which has been created to allow accurate switching of a PWM output at equip-spaced points along an XY path. - Programmable Laser ON time ...
AN-301 PWM Output control
PWM outputs are required for laser control and similar applications. This document defines the functions available on the MC405 or similar controller for PWM. Below functions are now supported: - Programmable Mark/Space PWM outputs. - Optional ...
Stepper Axis pulse output duty cycle and shape
The ATYPE 45 is A+B quadrature output square wave and will work with a drive that has the same type of input. alternatively ATYPE 43 outputs short pulses and a direction signal. You set the UNITS to 16 x the normal value to allow for the divider in ...
virtual output
Q: How do I used a virtual output? How can I read the state of the virtual output? A: Set virtual output with OP. Read virtual output with IN. OP(24,ON) IF IN(24)=ON THEN PRINT "OK" ENDIF
LinMot latest Drive support DS402 homing & Torque control
LinMot have updated their firmware to include Position, Speed & Torque control now. The respective CoE objects are mapped in the fixed PDO profiles. The below LinMot Drives with Firmware 6.10 able to support this profiles In the attached EC_EXTEND, ...