DX4 High Flex Motor Cable Performance
See Attachment.
Related Articles
AN-399 TrioPC Motion Performance with Flex-6 Nano
This document describes some timing tests with made with TrioPC motion Active X and Flex-6 Nano Motion Coordinator.
P350 - RS232 Cable Connections
This extract is from the full manual. Cable Connections
DX5 Brake Motor Control
There are two parts to setting up the brake control for DX5 drives that have brake motors connected to them. 1. Set the DX5 drive module for the axis required for remote brake control. In Basic Setup set the Motor Brake Assignment to Brake ...
Flex Nano not connecting to EtherCAT or HMI (E09 Error)
Please confirm that the firmware has been upgraded to 2.0318 or later with Bootloader V2.05 according to the technical bulletin. TB2202_Flex-6 and MC6N update. The Bulletin was distributed on 9th December 2022. After installing the update, the old ...
Rolling back firmware on Flex-6 Nano
Q. Since we’ve updated to v2.0322 there have been issues noticed on our rigs and immediately they are wondering if the TRIO firmware update might be to blame as nothing else changed. Is it possible to roll back the TRIO firmware from v2.0322 to ...