AN-319 Change of Coordinate system

This document demonstrate how to change the coordinate system of a machine from the world system to the object system given three points of the object.

This example use an example points to change the coordinate system of the machine from the red one to the green one:

• Related Articles

• AN-398 FRAME 114 - 3 Axis Delta Robot User Guide

  A FRAME is a transformation which enables the user to program in one coordinate system when the machine or robot does not have a direct or one-to-one mechanical connection to this coordinate system. FRAME = 114 enables the transformation for a 3 Arm ...

• AN-280 Right hand coordinate system with cut out template

  Most Trio FRAME transformations use the right-hand coordinate and rotation rules. All TOOL_OFFSETs and USER_FRAMES always use the right-hand rules.  This Application note describes the right hand rule and includes a handy template to cut out that ...

• AN-395 Trio Motion FRAME Transformation

  The purpose of the FRAME transformations is to allow users to program robots in Cartesian Coordinate system, where the given robot does not have a direct one-to one mechanical connection to this coordinate system. This document explains what are the ...

• AN-305 FRAME 11 - XY axis with rotating product

  The FRAME 11 transformation allows applications with a product rotating on (or under) an XY system to be easily programmed. The following picture shows the type of machine:

• AN-344 FRAME 41 - 4 Axis Scara Robot

  FRAME=41 enables the transformation for a 4 axis SCARA robot. This allows you to define the end position of the wrist in X.Y.Z and wrist angle (relative to the Y axis). This frame has been developed to work throw the new Robotic Programming System or ...