AN-280 Right hand coordinate system with cut out template
Most Trio FRAME transformations use the right-hand coordinate and rotation rules. All TOOL_OFFSETs and USER_FRAMES always use the right-hand rules. This Application note describes the right hand rule and includes a handy template to cut out that helps when designing systems that use this rule.
Related Articles
AN-319 Change of Coordinate system
This document demonstrate how to change the coordinate system of a machine from the world system to the object system given three points of the object. This example use an example points to change the coordinate system of the machine from the red one ...
AN-324 Calibrating Tool Centre Point (TCP)
When operating a machine that is able to achieve a point with x, y, z position and u, v, w orientation, is used to add on the TCP (tool centre point) a tool. After install the tool, the system need to know where the new TCP is. This document explains ...
AN-398 FRAME 114 - 3 Axis Delta Robot User Guide
A FRAME is a transformation which enables the user to program in one coordinate system when the machine or robot does not have a direct or one-to-one mechanical connection to this coordinate system. FRAME = 114 enables the transformation for a 3 Arm ...
AN-371 FRAME 33 - Gantry Robot plus 2 axis wrist with offset
The FRAME 33 transformation allows an XYZ Robot with 2 axis wrist to be easily programmed. The transformation function provides compensation in XYZ when the 2 wrist axis are rotated. This document explain how to use the FRAME 33
AN-327 FRAME 27 Cylindrical 4DOF Scara Robot
The FRAME 27 transformation allows a 4 axis cylindrical robot to be easily programmed. The transformation function provides a linear move in XYZ. The user can select tool compensation by a table data value.