AN-378 Multi Axis MOVELINK
The MOVELINK command provides a very flexible and easy to use method to link the motion of an axis to a “master” axis motion. The command has recently been extended to allow for up to 6 axes of motion to be linked to the same “master” motion.
This document explain how to use MOVELINK in the Trio motion coordinator
Related Articles
AN-314 MOVELINK_MODIFY Motion command
MOVELINK_MODIFY is a new axis parameter that allows MOVELINK motion commands to be modified whilst they are running. A typical example of using MOVELINK_MODIFY is for stopping product relative to a registration mark when using MOVELINK commands which ...
AN-320 MOVELINK SPEED Extension
MOVELINK is a flexible motion command that allows acceleration, constant speed and deceleration phases of a linked motion profile to be programmed separately or together. The accel and decel phases may be S ramp or linear ramp but for simplicity we ...
AN-382 MOVEPICK & PICKLINK
MOVEPICK is a move type aimed at making it much simpler to program fast pick and place operations. PICKLINK is a linked move equivalent to MOVEPICK that is linked to the measured motion on another axis in a similar way to MOVELINK or FLEXLINK. This ...
Trio Motion Coordinator MC403 sudden axis status error
Q: We always come up with “Axis Status: Error” and the active status flag is W (1) – Following error warning range and motor stops nearly instantly with E (8) – Following error exceeds limit. How can we solve it? A: With SERVO=OFF, can you make the ...
EURO 404 - Motion Problem at SERVO_PERIOD 250
A motion problem could occur when running MC403, MC405, Euro404 or Euro408 at 250 usec servo period. The moves would stop (buffers frozen) and an uncommanded movment could occur on one axis in an XY pair. The issue occured very infrequently and was ...