Motion Perfect
Can I run motion perfect 4.4.1 on Windows 11?
We can run Windows 11 with both MP v4.4.1 and MP v5.2.1 Trio have tested the HMI simulator 1.30.1.1935 which comes with 4.4.1 and it works OK. We also tested the HMI simulator 2.1.2.1874 which is with the next upcoming 5.2.2 release and that is also ...
MC202 controller and Motion Perfect
For the MC202 you must use Motion Perfect 2. Motion Perfect versions 3, 4 and 5 are for the later generation of Motion Coordinators that connect using Ethernet. I am running this version of Motion perfect 2 on my Windows 10 PC. You need a COM port on ...
Create a cam
Piecewise curve generation. The piesewise curve uses 5th degree polynomial interpolation between positions. The 5th degree polynomial has 6 unknowns so in order to solve it we need 6 data values. For a profile consisting of 2 points these are Point 1 ...
Trio Project Keys
I used to be able to generate project keys for Trio’s that are out in the field by using the Motion Perfect 2 project encryptor. I’d put the last 5 digits of the serial number in and that would give me the project key so I could make SD cards with ...
TextFIleLoader with MC400 Simulator
Q; Should I be able to load a TXT file from the TFL program to the MCsim? A: Yes it is quite OK to do that. The Text file will be stored on the PC hard drive in a folder that represents the SD card. Visible from Motion Perfect when you type DIR D ...
Error message regarding EC_EXTEND
Error message pointing to a line in EC_EXTEND with <! at the start. Why does it occur? Newer versions of Motion Perfect require the correct syntax for XML comments. For example: <!-- CoE CW (2), Target Pos (4), Touch probe (2), Digital outputs ...
Motion Perfect problem when SCOPE command is used
When running the SCOPE command in a program, I think Motion Perfect doesn't like the SCOPE command being issued over and over when I run it. It seems more stable when I comment the SCOPE command out after it's ran once. ...