DX4 PDO Working with Trio Basic Commands
Customers have the ability to create modified EC_EXTEND files for the Trio DX4 in Motion Perfect 5. This is accessible in the DX4 Drive Network Configuration with the option to configure Custom Profiles. Please see ATTACHMENT tab for further information.
Related Articles
How to pause and restart a BASIC program
BASIC programs run best when left to run continuously with functions controlled by setting values in the global VR varables. However sometimes it is necessary to put a program in a "paused" state while another program takes control of something. The ...Setting up Profinet connection with Trio Controllers
Requirement Minimum firmware version of 2.0319. Supporting Documents See the attached zipped file (dist.zip) for the following supporting files: Application Note AN-449 TRIO Controllers with Profinet Motion Perfect project sample GSD file: ...AN-404 How to Setup Balluff IO-Link device with Trio
The Balluff BNI 0077 EtherCAT to IO-Link bridge requires a setup profile that configures it for the IO-Link devices connected. A Trio EtherCAT master uses an ENI type file called EC_EXTEND to allow such configuration. This document explains how to ...Trio Scara Motor & Drive Sizes
Trio Scara Motor & Drive Sizes Drop Files to AttachAN-304 Adding TrioPC to Visual Basic
A connection between a Windows PC and a Motion Coordinator can be made with an ActiveX component called TrioPC Motion. The ActiveX component must be added to the Visual Basic project. This document describes this step by step. The example is based on ...