AN-336 FRAME 30 - 4 wire compensation for rectangular shape
Frame 30 allows for the wires to be joined to a rectangular plate. It also allows for the pay out over a wheel with a radius. The amount of wire on the wheel will vary depending on the XYZ position. Sometimes a flat plate is used to mount the camera and the lines are joined to the corners of the plate
This document explain about FRAME 30
Related Articles
AN-331 FRAME 17 - 4 Wire Frame compensation
The wire mounted camera FRAME 17 calculates wire lengths that assume straight lines. This can result in errors due to the weight of the cables making the lines "sag". The FRAME also assumes that the lines meet at a single point. Sometimes a flat ...
AN-371 FRAME 33 - Gantry Robot plus 2 axis wrist with offset
The FRAME 33 transformation allows an XYZ Robot with 2 axis wrist to be easily programmed. The transformation function provides compensation in XYZ when the 2 wrist axis are rotated. This document explain how to use the FRAME 33
AN-287 FRAME17 - Multi Wire camera position
The FRAME 17 transformation allows a wire mounted stadium camera to be easily programmed. The transformation function calculates the initial XYZ position of the camera using trilateration from 3 wire mounting points. During running the FRAME 17 ...
AN-286 FRAME 16 - XYZ robot with 2 Axis wrist
The FRAME 16 transformation allows an XYZ Robot with 2 axis wrist to be easily programmed. The transformation function provides compensation in XYZ when the 2 wrist axes are rotated. The FRAME 16 transformation is available for MC4XX controllers ...
AN-327 FRAME 27 Cylindrical 4DOF Scara Robot
The FRAME 27 transformation allows a 4 axis cylindrical robot to be easily programmed. The transformation function provides a linear move in XYZ. The user can select tool compensation by a table data value.