Which ESTUN motors can I use with the Trio DX4?
EMG and EM3A may be used with the Trio DX4. They have the correct encoder type.
The Trio MXM and MXL motors are of course perfect to use with the DX4 drives.
Related Articles
Trio Scara Motor & Drive Sizes
Trio Scara Motor & Drive Sizes Drop Files to Attach
DX5 Brake Motor Control
There are two parts to setting up the brake control for DX5 drives that have brake motors connected to them. 1. Set the DX5 drive module for the axis required for remote brake control. In Basic Setup set the Motor Brake Assignment to Brake ...
Brake Current Ratings For Trio MX Range Motors
MXL Range Motors All Brake Voltage Rated at 24Vdc ±10% Motor Size Brake Rated Power (W) Brake Operating Current (A) Brake Rated Torque (Nm) 50W 4.0 0.17 0.32 100W 4.0 0.17 0.32 200W 7.4 0.31 1.5 400W 7.4 0.31 1.5 750W 9.6 0.40 3.2 1KW 9.6 0.40 3.2 ...
Setting up Profinet connection with Trio Controllers
Requirement Minimum firmware version of 2.0319. Supporting Documents See the attached zipped file (dist.zip) for the following supporting files: Application Note AN-449 TRIO Controllers with Profinet Motion Perfect project sample GSD file: ...
AN-426 Using Touch Probe on ESTUN drive
This Application Note shows how to use the Registration with Touch Probe Enabled on the ESTUN PRONET Drive (Pronet SUMMA will be used for Illustration)