What is the type number for PC-MCAT power connector?

• Related Articles

• Serial ports on PC-MCAT for Motion Coordinator Channels

  The PC-MCAT API brings channels 1 and 2 out into the API, but does not map them to anything.  The attached little program is an example which will do that for you. It is a 7z folder encrypted with password abc123. A USB to RS232 converter will be ...

• Connector Kits for Motion Coordinators

  Spare connector kits are avaialble from Trio Distributors.  Here is the list of available kits. P920 - MC664/MC464 Connector Kit P921 - P876/P871 EtherCAT/RTEX module connector kit P922 - P879/P874 Flexaxis connector kit P923 - MC403/MC403-Z ...

• MC206X - Flash EPROM or RAM?

  MC206X can use the Flash Memory on power up. It depends on the setting of the POWER_UP paraemter. If POWER_UP = 1 then it will copy the programs from Flash to RAM on each power up. If set to 0, then it uses the RAM on power up and does not copy from ...

• Confirming available axis type on P825

  ATYPE 44 is the default on axis 0. It is analogue output servo with incremental encoder feedback. This comparison table might be useful.

• MC403 encoder power overload

  Issue: The 5 volt supply is taken from an axis port of the MC403 and cable length is >15 meters. After 15-20 days the power supply overloaded alarms comes. After removing and reconnecting the cable, the alarm went away. But after 2-3 days alarm came ...