project encryption

project encryption

1. Encrypt the project with your password.
2. Get the decryption Key (= value from your password and the controller serial number)
3. Load the project using the key.

The programs cannot be read or edited when in the controller.
The programs cannot be un-encrypted from the files.

You must keep safe the original plain text programs (.BAS files) because that is the only way to edit and re-encrypt again.

    • Related Articles

    • AN-295 Project Encryption in MC4

      There are now 3 variants for the project encryption: Controller, User and OEM. Controller Project Encryption is backwardly compatible with the previous version, so the current scheme will work correctly with Motion Perfect V2 and the Autoloader. ...

    • Trio Project Keys

      I used to be able to generate project keys for Trio’s that are out in the field by using the Motion Perfect 2 project encryptor. I’d put the last 5 digits of the serial number in and that would give me the project key so I could make SD cards with ...

    • AN-298 Multi User Encryption

      In a company, key features of that company’s technology are encrypted by a supervisor in a partial MP project. This encrypted project is handed to engineers who tailor the project to machines by adding machine specific program(s). After completing ...

    • Loading encrypted project from SD card

      This is the content for the SD card TRIOINIT.BAS ' *** ' SD Card decryption demo. ' Prepared by Trio Motion Technology Ltd. ' ' *** PROJECT_KEY "O5/A6qXkaXc" FILE "LOAD_PROJECT" "training ecr1" Replace the key above with yours and use your project ...

    • AN-401 Recovering project from MC2xx

      When programs are not “Fixed” in the Motion Coordinator’s Flash EPROM, there is a chance that the programs may be lost due to low battery voltage or an external event corrupting the RAM. This document will be helpful If the Motion Coordinator will ...