P367 Thermocouple Slice Updated Technical Note

• Related Articles

• AN-420 Thermocouple firmware User Guide

  This document explains the basics of using the Thermocouple temperature acquisition and control Flexslice (P367). V1.0 5th March 2020 For Software rev v1.014 – Created (includes heartbeat description) V2.0 7th April 2020 For Software rev v1.015 – ...

• P367 Thermocouple Integration with Motion Perfect v5.1 and later

  With the launch of Motion Perfect v5.1 and firmware updates to the P367 Thermocouple device it becomes easier to set up and control your P367 slices. Below is a screen shot showing the Basic Setup screen which easily allows programmers how to ...

• Thermocouple Flexslice Module - P367

  P367 (Basic) Thermocouple Flexslice Module Attached is the Application Technote and example program to help in getting started. VR assignment is commented to correspond with the Application Technote. Drop Files to Attach

• MC403 encoder power overload

  Issue: The 5 volt supply is taken from an axis port of the MC403 and cable length is >15 meters. After 15-20 days the power supply overloaded alarms comes. After removing and reconnecting the cable, the alarm went away. But after 2-3 days alarm came ...

• Technical request for lifetime of flashROM (MC4N)

  The VRs are saved in a file system like a flash-stick so it is not erasing the flash every time you change a value. It uses many pages of flash. The expected lifetime is published on the Trio website on the specifiations pages. Compare Controllers ...