Related Articles
Recovery SD card file name
When recovery of a Motion Coordinator with the recovery boot system, a special file name is used for the firmware file on the SD card. Go to the Trio website www.triomotion.com, log in and go to the Software->All Firmware page. Select the firmware ...
AN-282 Recovery from a failed system software load
Some Motion Coordinators have a built-in boot loader which can be used to aid recovery in the event of a failed system software load. This application note applies to using the boot loader in the MC302X, MC403, MC405, MC464, MC4N-ECAT, MC4N-RTEX, and ...
AN-356 Firmware update procedure for UNIPLAY HMI
Uniplay 10' (P844) Human Machine Interface may be returned to us with corruption of the Flash that either causes the system to halt or prevents booting altogether. It is also possible if an update has not been interrupted or was not successful that ...
AN-342 Error during loading firmware
When installing a new firmware version, the process has two main steps. Firstly, the firmware file is downloaded on to the RAM memory and after that, the firmware is installed from RAM into the flash memory. If for any reason the power from the ...
Rolling back firmware on Flex-6 Nano
Q. Since we’ve updated to v2.0322 there have been issues noticed on our rigs and immediately they are wondering if the TRIO firmware update might be to blame as nothing else changed. Is it possible to roll back the TRIO firmware from v2.0322 to ...