AN-412 Replacing firmware on UNIPLAY-7 MK1
The HMI firmware 1.29 and above does not work with UNIPLAY-7 Mk1*
If in case, there was an update made to these UNIPLAY-7 Mk1*, the HMI client does not boot anymore.
In this document describes how to restore the firmware back to the original
* :- How to identify if it's Mk1 or Mk2? The Mk1 UNIPLAY-7 has a dark grey body, while the Mk2 UNIPLAY-7 has light grey body
Related Articles
AN-356 Firmware update procedure for UNIPLAY HMI
Uniplay 10' (P844) Human Machine Interface may be returned to us with corruption of the Flash that either causes the system to halt or prevents booting altogether. It is also possible if an update has not been interrupted or was not successful that ...AN-429 Replacing Lithium battery on UNIPLAY HMI
The UNIPLAY HMI takes one CR2032 / CR1225 / CR1220 coin lithium battery to keep the RTC running. Battery specification: CR2032 / CR1225 / CR1220 3V lithium battery. This document explains how to change this batteryAN-343 Jogging axis with Trio UNIPLAY HMI
This document will show the user some tips to program a jogging operation with a Trio Uniplay HMI.Uniplay HMI IP Address Change Using Motion Perfect
A video is available on our Trio Website showing how to carry out the IP address of your Uniplay 7 or 10 HMI. Please follow this link. http://www.triomotion.uk/system/downloadPage.php?location=%2Fvideos%2FUniplay_HMITPS Teach Pendant as Uniplay HMI (P955)
The example program and documentation shows how to use the Teach Pendant as a more conventional Uniplay HMI. It also shows how to assign bindings to the physical buttons on the peripheral of the front membrane.