Enquiry about Endat interface using Bekchoff EL5032

• Related Articles

• Enquiry about MC508 encoder axes

  A customer wants to know if he can use mixed encoders on the MC508. For example, Axes 0 to 5 are Endat absolute encoders and 6 and 7 are incremental encoders. Answer: By using the ATYPE command you can set any of the 8 axes to be either incremental ...

• MC508 P849 EnDat encoder input

  We are to propose a solution for 6axis step&dir and 2 ENDAT encoders reading. I would like to be sure the P849 is able to manage the two requests together. Yes, EnDAT will work on any of the first 8 axes. It does not work if there is another axis ...

• Analog incremental linear encoder input to Trio

  We are looking to retrofit a Trio controller to a 3 axis CNC machine which has heidenhain analog incremental linear encoders fitted (1Vpp - 40um linear period) but unsure which if any controller has this function available. Can you advise please - ...

• AN-315 EtherCAT setup for Panasonic A5B Drive

  When delivered, the Panasonic A5B has 2 features set; the Positive Over Travel Input (POT) and the Negative Over Travel input (NOT). If these are connected to limit switches then the system will work in the usual way until the limit switch is ...

• MC4N Sync Encoder

  The encoder axis in the MC4N will automatically set itself up. With no EtherCAT axes it will be axis 0 and the ATYPE will show as either 44 (servo) or 76 (incremental encoder). You can connect an encoder and it will count the pulses straight away. ...