Related Articles
Error display Exx - what do they mean?
Error Display Codes Unn Unit error on slot nn - see SYSTEM_ERROR Ann Axis error on axis nn - see AXISSTATUS Cnn Configuration error on unit nn ie: too many axes - see SYSTEM_ERROR Exx processor / memory event - see SYSTEM_ERROR and FLASH_LOG E00 - ...
Reading DX4 Fault Code Displayed On Front Of Drive
The code below will move the error number displayed on the 8 segment display into a declared variable for use in other programs. 'This example is for Axis 0 error number reading ' 'CO_READ_AXIS(axis_number, index, subindex ,type [,vr_number]) 'CoE ...
ActiveX: Get controller details
This sample of code is from a Visual Basic Program. It reads system variables from the Motion Coordinator after the TrioPC Motion ActiveX/DLL connection is opened. Dim d_value As Double Dim l_value As Long ...
Trio Motion Coordinator MC403 sudden axis status error
Q: We always come up with “Axis Status: Error” and the active status flag is W (1) – Following error warning range and motor stops nearly instantly with E (8) – Following error exceeds limit. How can we solve it? A: With SERVO=OFF, can you make the ...
AN-335 Gantry Error Compensation
This document explains how to correct the position error between the two motors commanding the Gantry axis (longitudinal axis) of advanced Gantry systems