AN-429 Replacing Lithium battery on UNIPLAY HMI
The UNIPLAY HMI takes one CR2032 / CR1225 / CR1220 coin lithium battery to keep the RTC running.
Battery specification: CR2032 / CR1225 / CR1220 3V lithium battery. This document explains how to change this battery
Uniplay Issues After Low Battery Condition - Checks & Corrective Actions
When the original battery in the Uniplay HMI expires at the end of its serviceable life the start sequence of the Uniplay may start to exhibit some issues. The UNIPLAY HMI takes one CR2032 / CR1225 / CR1220 coin lithium battery to keep the RTC ...
AN-318 MC2xx Battery backed RAM
This document explains about the battery backed RAM of MC2xx series controller The MC224 has a non-rechargeable Lithium Ion battery. The nominal lifetime is 10 years before replacement is necessary. See AN-257 “Replacing MC224 battery”
AN-343 Jogging axis with Trio UNIPLAY HMI
This document will show the user some tips to program a jogging operation with a Trio Uniplay HMI.
Uniplay HMI IP Address Change Using Motion Perfect
A video is available on our Trio Website showing how to carry out the IP address of your Uniplay 7 or 10 HMI. Please follow this link. http://www.triomotion.uk/system/downloadPage.php?location=%2Fvideos%2FUniplay_HMI
AN-412 Replacing firmware on UNIPLAY-7 MK1
The HMI firmware 1.29 and above does not work with UNIPLAY-7 Mk1* If in case, there was an update made to these UNIPLAY-7 Mk1*, the HMI client does not boot anymore. In this document describes how to restore the firmware back to the original * :- How ...