AN-420 Thermocouple firmware User Guide

AN-420 Thermocouple firmware User Guide

This document explains the basics of using the Thermocouple temperature acquisition and control Flexslice (P367).

V1.0 5th March 2020
For Software rev v1.014 – Created (includes heartbeat description)
V2.0 7th April 2020
For Software rev v1.015 – updated for software v1.015 (added calibration mode description and additional fault codes)
V2.1 9th April 2020
For Software rev v1.015 – Merged in CoE object dictionary
V2.2 14th April 2020
For Software rev v1.015 – Corrected AN number, added doc history
V2.3 24th April 2020
For Software rev v1.016 – Updated ref. BASIC program description
V3.0 22nd December 2020
Tx/Rx VR’s revised for alignment with MP defaults of 100/200
V3.1 25th January
Added cold-junction calibration information foot-note
V3.2 16th February
Corrected Global Status/Control word oids in Pdo section

    • Related Articles

    • P367 Thermocouple Slice Updated Technical Note

      P367 Thermocouple FlexSlice Firmware User Guide This documentation is for use with controller firmware v2.0304 and newer. With this firmware version the controller will identify the P367 module without the need for the use of an imported EC_EXTEND ...

    • P367 Thermocouple Integration with Motion Perfect v5.1 and later

      With the launch of Motion Perfect v5.1 and firmware updates to the P367 Thermocouple device it becomes easier to set up and control your P367 slices. Below is a screen shot showing the Basic Setup screen which easily allows programmers how to ...

    • AN-398 FRAME 114 - 3 Axis Delta Robot User Guide

      A FRAME is a transformation which enables the user to program in one coordinate system when the machine or robot does not have a direct or one-to-one mechanical connection to this coordinate system. FRAME = 114 enables the transformation for a 3 Arm ...

    • Thermocouple Flexslice Module - P367

      P367 (Basic) Thermocouple Flexslice Module Attached is the Application Technote and example program to help in getting started. VR assignment is commented to correspond with the Application Technote. Drop Files to Attach

    • AN-342 Error during loading firmware

      When installing a new firmware version, the process has two main steps. Firstly, the firmware file is downloaded on to the RAM memory and after that, the firmware is installed from RAM into the flash memory. If for any reason the power from the ...