AN-419 TrioPCMotion TCP port
Motion Coordinator firmware version 2.0300 has the ability to open a TCP server port on Ethernet.
This document describes a program that can be run in Visual Basic to communicate with the Motion Coordinator.
Requires TrioPC Motion ActiveX V2.20.5 or higher.
Related Articles
AN-304 Adding TrioPC to Visual Basic
A connection between a Windows PC and a Motion Coordinator can be made with an ActiveX component called TrioPC Motion. The ActiveX component must be added to the Visual Basic project. This document describes this step by step. The example is based on ...
Modbus TCP and Ethernet IP on Flex-6-Nano
Q. Can we run and use Modbus TCP server and Ethernet IP server on Flex-6-Nano at the same time? A. Yes you can use both in parallel. They open different "port" numbers on the Ethernet communications but have the same IP Address. For example Modbus is ...
AN-326 Connecting to TCP/UDP client
It is possible to open one or more communication channels with remote devices using the TCP and UDP protocols via the controller’s main Ethernet port. This document explain and provide example of doing this
Ethernet IP between controllers
No, it is not possible to set up EthernetIP between Motion Coordinators because our EthernetIP can only be the server side and we have no Client (Scanner) function. There are other protocols which can be used, for example Modbus TCP/IP can be set up ...
Ethernet Modbus TCP VR mapping, ETHERNET function
Q. I want to compile the existing project and the compiler says it has problems with the ETHERNET command. A. I can see the MC403 which does not work has 2.0268 which is relatively old. The controller that does work has a different firmware version. ...