AN-350 Trio information of EMC
Trio’s products are certified to comply with the essential requirements of Annex I to the Directive 2014/30/EU on Electromagnetic disturbance and Electromagnetic immunity.
This document explains how to achieve this compliance, certain restrictions or best engineering practices by system designers.
Related Articles
Trio Scara Motor & Drive Sizes
Trio Scara Motor & Drive Sizes Drop Files to Attach
Setting up Profinet connection with Trio Controllers
Requirement Minimum firmware version of 2.0319. Supporting Documents See the attached zipped file (dist.zip) for the following supporting files: Application Note AN-449 TRIO Controllers with Profinet Motion Perfect project sample GSD file: ...
EtherCAT start - diagnostic information
When reporting an EtherCAT startup error, please send the following information to Trio technical support. 1) The text shown on the terminal after ETHERCAT(0, 0) For example: >>ETHERCAT(0,0) Warning - EtherCAT cable or network not detected (slot 0). ...
DX4 PDO Working with Trio Basic Commands
Customers have the ability to create modified EC_EXTEND files for the Trio DX4 in Motion Perfect 5. This is accessible in the DX4 Drive Network Configuration with the option to configure Custom Profiles. Please see ATTACHMENT tab for further ...
Trio & Beckhoff EL7221 drive
Beckhoff EL7221-9014 supports the MDP 742 and DS402 drive profiles. Both profiles contain the same parameters. They only differ in terms of the specified designations and the parameter index. Trio controller only works with DS402. User have to ...