AN-341 Conversion from EURO205 to EURO205X
The Euro 205X is the closest controller in the MC2 range to the performance and functionality of the Euro 205.
This document gives the answers to the most asked questions about the upgrade path from Euro 205 to the new Euro 205X.
Related Articles
MC_CONFIG vs Flash parameters
All Motion Coordinators store the IP_ADDRESS, IP_NETMASK and IP_GATEWAY in Flash memory. So there is usually no need to add them to the MC_CONFIG. There are some differences with other system parameters. MC4N-ECAT, MC4N-RTX, MC6N-ECAT, Flex-6 Nano ...AN-334 Conversion from EURO205x to EURO 404/408
The Euro 404/408 is the closest controller in the MC4 range to the performance and functionality of the Euro 205X. This document gives the answers to the most asked questions about the upgrade path from Euro 205X to the new Euro 404/408.Replace EURO205X with EURO209
The Euro 209 and Euro 404/408 share the same pinout arrangement which is somewhat different to the Euro 205(x). So changing from 205 to either the 404 or 408 will have the same hardware challenges. Software wise the 205/404 difference is similar to ...AN-296 Conversion MC206x to MC405
The MC405 is the closest controller in the MC4 range to the performance and functionality of the MC206/MC206X. This document gives the answers to the most asked questions about the upgrade path from MC206/MC206X to the new MC405AN-358 Conversion from Old Trio Keypad to UNIPLAY HMI
Systems using the P502 and P503 vacuum-fluorescent keypads can be updated to use the Trio 7 inch or 10 inch HMI. (P845 and P846) This document explains how to convert from this old keypads to the UNIPLAY HMI There are options to either use a ...