AN-334 Conversion from EURO205x to EURO 404/408

• Related Articles

• AN-341 Conversion from EURO205 to EURO205X

  The Euro 205X is the closest controller in the MC2 range to the performance and functionality of the Euro 205. This document gives the answers to the most asked questions about the upgrade path from Euro 205 to the new Euro 205X.

• Replace EURO205X with EURO209

  The Euro 209 and Euro 404/408 share the same pinout arrangement which is somewhat different to the Euro 205(x). So changing from 205 to either the 404 or 408 will have the same hardware challenges. Software wise the 205/404 difference is similar to ...

• AN-296 Conversion MC206x to MC405

  The MC405 is the closest controller in the MC4 range to the performance and functionality of the MC206/MC206X. This document gives the answers to the most asked questions about the upgrade path from MC206/MC206X to the new MC405

• AN-358 Conversion from Old Trio Keypad to UNIPLAY HMI

  Systems using the P502 and P503 vacuum-fluorescent keypads can be updated to use the Trio 7 inch or 10 inch HMI. (P845 and P846) This document explains how to convert from this old keypads to the UNIPLAY HMI There are options to either use a ...

• AN-384 Conversion from P315/316 to P319 Trio CAN I/O Module

  The P319 is the new replacement for the P315 and P316 CANbus IO modules from Trio. This document lists the compatibility and differences between the older modules and the new P319.