AN-298 Multi User Encryption
In a company, key features of that company’s technology are encrypted by a supervisor in a partial MP project. This encrypted project is handed to engineers who tailor the project to machines by adding machine specific program(s). After completing the project the remaining programs are encrypted by the engineer using a different password.
In this way the whole project is prevented from being viewed or edited by the machine user. The company’s engineers can only edit and change the parts they created. The supervisor can view or edit the entire project assuming he has access to the engineer’s password.
This document explains how to use this function
Related Articles
AN-295 Project Encryption in MC4
There are now 3 variants for the project encryption: Controller, User and OEM. Controller Project Encryption is backwardly compatible with the previous version, so the current scheme will work correctly with Motion Perfect V2 and the Autoloader. ...
project encryption
1. Encrypt the project with your password. 2. Get the decryption Key (= value from your password and the controller serial number) 3. Load the project using the key. The programs cannot be read or edited when in the controller. The programs cannot be ...
AN-402 User PID Function Block
Trio BASIC includes a PID function for general purpose use. The function mirrors the PID found in a typical IEC 61131-3 PLC programming system. This document explains how to use the USER_PID function and examples.
AN-398 FRAME 114 - 3 Axis Delta Robot User Guide
A FRAME is a transformation which enables the user to program in one coordinate system when the machine or robot does not have a direct or one-to-one mechanical connection to this coordinate system. FRAME = 114 enables the transformation for a 3 Arm ...
AN-377 User Guide for MOVETURN
The MOVETURN move type allows certain multi-axis moves which have a start and end position with start and end speed vector to be easily programmed. This document explains how to use the command MOVETURN