Access file share (SAMBA or NFS)
The Ethernet stack that we include in the Trio products does not support those features. To add it will need us to buy a major stack upgrade and allocate development time to integrate it. Most likely this will be part of a new range of Motion Coordinators designed for the 2020s.
Related Articles
FILE command for Rename file
To rename a file on the SD card use the FILE "REN " function. It was not documented in the Help with Motion Perfect 5.2 but will be included in the MP version 5.3 release. Typical syntax is FILE "REN" "test_file.txt" "test.txt"
AN-353 Trio Ethernet/IP
This document describes Trio controller support for the EtherNet/IP protocol. The controller can act as a Class 1, 2 and 3 adapter (server) on an EtherNet/IP based network. The Motion Coordinator series 4 and above provide this support.
AN-283 Wireshark Ethernet monitor
Ethernet can carry many types of telegram. When connecting a system together, it is often necessary to monitor the telegram traffic and see how the available bandwidth is being used. This is especially true when a real-time automation system is using ...
Ethernet Modbus TCP VR mapping, ETHERNET function
Q. I want to compile the existing project and the compiler says it has problems with the ETHERNET command. A. I can see the MC403 which does not work has 2.0268 which is relatively old. The controller that does work has a different firmware version. ...
Ethernet IP between controllers
No, it is not possible to set up EthernetIP between Motion Coordinators because our EthernetIP can only be the server side and we have no Client (Scanner) function. There are other protocols which can be used, for example Modbus TCP/IP can be set up ...